GK-CB High-Pressure Self-Priming Pump

Tlhaloso e Khutšoanyane:

GK-CB high-pressure self-priming pump ke mokhoa o monyenyane oa ho fana ka metsi, o loketseng ho noa metsi a malapeng, ho phahamisa metsi a seliba, khatello ea lipeipi, ho nosetsa serapeng, ho nosetsa limela tsa limela le ho ikatisa.E boetse e loketse phepelo ea metsi libakeng tsa mahaeng, aquaculture, lirapa, lihotele, li-canteens le meaho e phahameng.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

MOHLALA Matla
(W)
Palo ea li-volts
(V/HZ)
Hona joale
(A)
Ho phalla
(L/mots)
Max.hlooho
(m)
Phallo e lekantsoeng
(L/mots)
Hlooho e lekantsoeng
(m)
Hlooho ea ho hula
(m)
Boholo ba phala
(mm)
GK-CB200A 200 220/50 2 33 25 17 12 8 25
GK-CB300A 300 220/50 2.5 33 30 17 13.5 8 25
GK-CB400A 400 220/50 2.7 33 35 17 15 8 25
GK-CB600A 600 220/50 4.2 50 40 25 22 8 25
GK-CB800A 800 220/50 5.2 50 45 25 28 8 25

Letoto la lipompo tsa GK-CB li na le ts'ebetso e ikemetseng, ke hore, ha pompo e buloa, pompo e tla qala ka bo eona;ha pompo e tima, pompo e tla emisa ka bo eona.Haeba e sebelisoa le tora ea metsi, mochine o ka holimo oa moeli o ka sebetsa kapa oa emisa ka metsi a tora ea metsi.Letoto lena le na le sekoaelo le setsi, kahoo le ka sireletsa pompo ho tloha letsatsing le matla le pula.

Lerata le Tlase

Letoto la GK-CB le nang le khatello e phahameng ea ho itšebetsa (400-1)
Letoto la GK-CB le nang le khatello e phahameng ea khatello ea maikutlo (400-3)

E loketse ts'ebeliso ea kantle

Letoto la GK-CB le nang le khatello e phahameng ea khatello ea maikutlo (400-5)
Letoto la GK-CB le nang le khatello e phahameng ea ho itšebetsa (400-2)

Likarolo tsa letoto la GK-CB:
1. Double Intelligent Control
Ha tsamaiso ea khatello ea khatello e kena ts'ireletso, pompo e tla fetoha ka tsela e iketsang tsamaisong ea taolo ea phallo ho netefatsa phepelo e tloaelehileng ea metsi.
2. Micro-computer Control
Sensor ea phallo ea metsi le khatello ea khatello e laoloa ke PC microcomputer chip ho etsa hore pompo e qale ha e ntse e sebelisa metsi le ho e etsa hore e koalehe ha e sa sebelise metsi.Mesebetsi e meng e sireletsang le eona e laoloa ke micro-computer.
3. Tšireletso ea khaello ea metsi
Ha metsi a kenang pompong ea metsi a haelloa ke metsi, pompo ea metsi e kenella ka mokhoa o itekanetseng tsamaisong ea tšireletso ea khaello ea metsi haeba pompo e ntse e sebetsa.
4. Tšireletso ea mocheso o feteletseng
Coil ea pompo ea metsi e na le mosireletsi oa mocheso o feteletseng, o ka thibelang motlakase hore o se ke oa senyeha ke hona joale kapa lintho tse ling tse tlamang impeller.
5. Tšireletso e khahlanong le mafome
Ha pompo ea metsi e sa sebelisoe nako e telele, e qobelloa ho qala ka metsotsoana e 10 ka lihora tse ling le tse ling tse 72 ho thibela mafome kapa sekhahla.
6. Ho lieha ho qala
Ha pompo ea metsi e kenngoa ka har'a sokete, e lieha ho qala ka metsotsoana ea 3, e le ho qoba matla hang-hang le ho phatloha ka har'a sokete, e le ho sireletsa botsitso ba likarolo tsa elektronike.
7. Ha ho qalo khafetsa
Tšebeliso ea mochine oa khatello ea elektronike e ka qoba ho qala khafetsa ha phallo ea metsi e le nyenyane haholo, e le ho boloka khatello e sa khaotseng le ho qoba ho phalla ha metsi ka tšohanyetso e kholo kapa e nyenyane.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona